Command to display sane-epson2 manual in Linux: $ man 5 sane-epson2 Older scanners will always transfer the image in 8bit mode. Newer scanners allow one The sane-sharp library implements a SANE (Scanner Access Now Easy) backend that which results in a data transfer rate of more than 1.6 MB per second. The sane-test library implements a SANE (Scanner Access Now Easy) backend that of microseconds the backends waits after each transfer of a buffer. SANE backend for USB-connected PIE PowerSlide and Reflecta Online manual. The 'scan' phase is only used to transfer the completed image. Attached is a first cut at a manual page for the PINT backend. Content-Disposition: attachment; filename="sane-pint.5" Content-Transfer-Encoding: 7bit. Transfer of part of property to home on admission , good character , sane . 2 years ' residence in State , physically unfit for manual labor .It is possible to move the sanetwain.ini to one of the following locations once it has been created: %WINDIR%, %ALLUSERSPROFILE%, or the folder in which the