happijac bed lift chain adjustmenthappijac bed lift replacement parts
happijac bed lift installation
happijac bed lift brake
happijac bed lift control switch
happijac bed lift controller 149663

Bed Lift Control Switch - LCI-Supplied Switch Only. 10. Relocating Limit Switches. 11. Manual Operation. 12. Manually Raise the Bed(s).Re-apply brake at desired bed height. 5. Reconnect motor plug. To Manually Raise the beds: 1. Unplug the motor. 2. Release the brake. Emergency Manual Operation. 16. Manually Raise The HappiJac® Bed Lift System is a chain-driven two trolley lift system operated by a 12V DC motor, which. Raising the Bed Lift. 16. Troubleshooting. 16. Advanced Control System (ACS) Stop Setting Procedure. 16. Manual Override. 17. Maintenance. 17. HAPPIJAC® BED Emergency Manual Operation. 14. Manually Raise the Bed(s)/Sofa or Dinettes. 14. Manually Lowering the Bed(s). 15. Introduction. The HappiJac® Bed Lift A. Turn the ratchet clockwise to raise the bed(s). NOTE: Manual operation of the bed lift system is easier with two people cranking on opposing crank points. B. Operating Instructions:​​ The bed(s) is/are operated from the control switch. Pressing and holding the switch in the UP position moves the bed(s) upward.