The UV-3600 Plus is designed mainly for the measurement of liquid samples. But a wide range of accessories, such as the multipurpose large-sample compartment (MPC-603) with integrating sphere and three detectors, enables measurement of solid samples. With the guaranteed precision of the ASR Series (Absolute Specular Reflectance) attachments Sample Compartment Unit. This unit is required when using the micro-cell, micro flow-thru cell, square long path absorption cell, cylindrical cell, film holder, or constant-temperature cell on the UVmini series. Remove the standard cell holder and replace it with this unit. For UVmini, UV-1280. Hig h S en s itiv i t y The UV-3600 Plus provides precise transmittance or reflectance measurements in the ultraviolet to near-infrared regions. The level of sensitivity in the near-infrared region is significantly enhanced by using the combination of an InGaAs detector and a cooled PbS detector for this region. Have your Shimadzu representative perform any repairs requiring removal of the main cover. • If the power cord plug gets dusty, remove the plug from the power outlet and wipe away the dust with a dry cloth. If dust is allowed to accumulate, fire could result. • Replacement parts must be of the specifications given in "1.1 UV-1800 Configuration" UV-1280. The Shimadzu UV-1280 is a low-cost, high-quality instrument ideal for applications ranging from routine environmental and food quality testing to life science analyses. The monitored double-beam UV-1280 is equipped with seven measurement modes, features USB data portability, and offers wavelength scanning from 190 to 1,100 nm. 2.3 Installation of UV-1700 Once the installation site has been decided, install the UV-1700 in accordance with the following procedures. 2.3.1 Power Check The UV-1700 uses a 130VA power supply. Be sure to use a power supply of at least 130VA (if a PC system is to be used, PC and printer power supplies must be taken into consideration as well). Shimadzu's UV-3600 Plus UV-Vis-NIR spectrophotometer is built with three detectors and a high-performance double monochromator system so and offers a high level of sensitivity and resolution. The UV-3600 Plus is the world's first spectrophotometer to be equipped with three detectors. It is provided with a wide range of wavelengths and a The Variable Angle Reflection Accessory is designed for specular reflection studies of films on metallic substrates, coatings, contaminants on reflective surfaces, and measurements of film thickness. The Variable Angle Reflectance Accessory comes with a sample stage that allows the incident angle to be continuously changed from 30º to 80º. Deuterium Lamp For UV-Vis Spectrophotometers E-mail this product to a friend Deuterium Lamp for UV-160, UV-1201, UV-1240, UV-1280, UV-BioMini, UV-1600 Series, UV-1700 Series, UV-1800 Series, UV-1900 Series, UV-2400 Series, UV-2500 Series, UV-2101, UV-2600 Series, UV-2700 Series, UV-3101, UV-3600 Series, UV-3600Plus Series, SolidSpec-3700 Series Slit Width - For typical absorption/transmission measurements in the UV/Vis range, use 5 nm. Use a larger slit width in order to get greater intensity in IR measurements and/or when using the external chamber (Shimadzu recommends the largest slit width which does not give a "Baseline Energy OVER!" message when the baseline is finished). In addition to the main UV-3600 Plus unit, the Multi-purpose large-sample compartment and the Integrating sphere attachment also fea