Make sure this fits by entering your model number.; 【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self Connect the battery to the charge regulator-plus and minus. There are lithium battery and lead-acid battery switching function (at the battery PWM Solar Charge Controller User Manual Email: sales@inverter.com Tel: +1 800-585-1519 Web: inverter.com. Title: PWM solar charge controller user manual What is Powmr Manual. Likes: 597. Shares: 299. PWM Solar Charge Controller User Manual . Title: 40A 50A 50A PWM Solar Charge Controller User Manual Author: ATO Created Date: 8/22/2019 10:23:30 AM Not a problem 1 x Solar Controller 60A 1 x User Manual (English) 4 x PowMr 1KW 3KW 5KW Solar Hybrid Charger Inverter 24V 48VDC And 230VAC Built-in 40A 60A MPPT Solar PV Charge Controller Brief Instruction This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power.Click here for the best price:amzn.to 1. Solar panel to the charge controller which charges the 12V batteries. The batteries are connected in series to provide 24V power to the LED's. The charge controller is "set" to provide power continuously and a photocell/photo diode is used to control "dusk to dawn" power to the LED's. 2. It uses this time to as TO and T0x1 0 = T1. Boost Stage: The charger will supply constant voltage and reduce the current slowly through this stage. The charger will stay in this stage until T1 has run out. After this time the charger will enter the float stage. This stage will last between 1 hour and 12 hours depending on T1. Product Model: RBL-10A-Li. Build-in industrial micro controller. Big LCD display,all adjustable parameter. Fully 3-stage PWM charge management. Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging. Load turns on 10 minutes after daylight not detected, stays on for X hours. • Manual Load (Mode 15) Press the light control key on the controller to turn load on/off. • Turn Off Load (Mode 16) Load will stay off in this mode. • Always On (Mode 17) Load will stay on as long as connected battery is above 11V. • USB Ports. Powmr 30a solar charge controller manual. Powmr 60a mppt solar charge controller manual. Featuresà ¢ 1) Controller 100% MPPT 2) Technology Monitoring Technology intelligent power 3) High-performance DSP control built-in 4) 12V / 24V / 36V / 48V 5 automatic battery voltage detection) The charge optimizes The three-stage battery performance PowMr 12V/24V 10A 20A Z Series PWM Solar Charge Controller With Backlit LCD The controller is for off-grid tie system and control the charging and discharging of the battery.main function is protecting battery and improve.This parameter is High Voltage Disconnect(HVD) voltage.(Boost state voltage will be increase 0.6V base on HVD).the PowMr 12V/24V 10A 20A Z Series PWM Solar Charge Controller With Backlit LCD The controller is for off-grid tie system and control the charging and discharging of the battery.main function is protecting battery and improve.Thi