MP 110 - MP 111 MP 115 - MP 112 KEY POINTS - Easy to use Backlight - Selection of units - Manual autozero TECHNICAL FEATURES Measuring elements Piezoresistive sensor Tolerated overpressure MP 110 : 250 mbar / MP 111 : 700 mbar MP 115 : 1.4 bar / MP 112 : 3 bar Connector Display 4 lines, LCD technology. Sizes 50 x 36 mm. KIMO 5018 20V Cordless Portable Pressure Washer GENERAL SAFETY RULES WORK AREA Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust … FT_vt_110_vt_115 Author: Jitka Created Date: 8/24/2016 11:13:57 AM A hotwire-style anemometer, the KIMO VT110S has a long-length thin probe sensor which is ideal for inserting into smaller ducts, or difficult applications where a normal vane anemometer simply wouldn't be suitable. The KIMO VT110S can be used to measure air velocity from 0.15 to 30m/s with selectable m/s, fpm and km/h measuring units. Turn on the device by pressing on « On/Off/Esc ». The device displays its name « MP110 », « MP111 », « MP112 » or « MP115 », then performs an autozero. Connect the pressure tubes. The device displays the pressure. Manometer MP 110 - MP111 - MP112 - MP 115 OK key On/Off/Esc key Select key Hold/min/max key Backlight key PERFORM AN AUTOZERO Kimo VT115 Measuring Instruments: Frequently-viewed manuals. SMC Networks ZSE30A series Operation Manual Operation manual (1 pages) Meec Tools 405-046 Operating Instructions Manual Operating instructions manual (13 pages) Pepperl+Fuchs AS-i Compact Manual Compact manual (35 pages) Measurement of temperature, hygrometry and air velocity (depending on models) Interchangeable modules Up to 6 measurements simultaneously Device/probe wireless communication KEY POINTS CONNECTIONS REFERENCES The new probes use a mini-DIN cable unique and pluggable that fits on every probes. This cable is supplied with each instrument. TM 110 KEY POINTS Material : ABS V0 as per UL94 Protection : - duct model and model with terminal block : IP65 - ambient model : IP20 Display : LCD 10 digits. Size : 50 x 17 mm Height of digits : Values : 10 mm ; Units : 5 mm Cable gland (duct model and model with terminal block) : For cables Ø 8 mm maximum Weight : 162 g Kimo's VT 110 / 115 is perfect for measuring airflow, air velocity and temperature with its hot wire probe. FEATURES Perfect for measuring airflow, air velocity and temperature with its hot wire probe Display max / min values Airflow calculation with cone Dimensions of rectangular and cicular duct Air velocity compensation in atmospheric pressure Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts. Inquire now Measurement of temperature, hygrometry and air velocity (depending on models) Two inputs for Pt100 temperature (from -200 to +600°C) Set units and ranges Interchangeable modules The Kimo VT110 is a low cost thermal anemometer for the measurement of air velocity (0.15 to 30 m/s range), air flow volume (0 to 99,999 m³/h range) and ambient air temperature (0 to + 50 °C range). The VT110 is supplied as standard with a straight / rigid probe on a 2 m flexible cable. Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts. Technical Data sheet